ONPで製作したPCB基板を紹介するページです。
これらの基板はCreative Commons Attribution-Share Alike 2.5 ライセンスに則ったOpen source Hardwareです。
These boards are distributed as Open source Hardware under Creative Commons Attribution-Share Alike 2.5 license
この基板は簡単にPhysical Computingをすることが出来るArduino Cloneにもなるボードです。
このボードが気に入ったのなら自分でOlimex等にこのページの下のほうにあるEagleファイルを送って作ったり、
support(at)onpllp.comにメールをくれればキットも販売します。
日本ではAVRのCPU基板をうっているところが少ないので自分でブレッドボード上で使えるAVRのCPUボードを作りました。この基板は製作者の名前からhatayama基板ともいわれています。
arv mini bordは基本的には秋葉原に売っている部品で基板を組み立てられる手でハンダ付けできる部品を使ったとても小さなCPUボードです。(ただ、CPUを付けるのには少し練習が必要が必要です。)。
Have you ever struggled getting CPU board for AVR in Japan ? There are only few places where you can purchase CPU board for AVR in Japan, and thus I designed this CPU board for AVR so as to be able to use on breadboard.This board is also known as "Hatayama kiban" after its designer's name. An Avr mini board is a very small CPU board mainly build with parts obtainable in Akihabara. All of the parts can be soldered by hand. (Thought it needs some placticing to solder CPU :-) )
このCPU基板は、atmega8 や atmega88,168などのマイコンを乗せることが出来ます。言語もあなたの好きな言語、WinAVRやBascom AVR、さらにはArduino Softwareなどをつかってプログラミングすることが出来ます。
This CPU board can carry microcomputer such as atmega8 atmega88 and 168.With this CPU board, you can select the languages of your choice between WinAVR, Bascom AVR and Arduino Software, and can start programing.
この基板を含めたkitはONPのsupport(at)onpllp.conに連絡をくれればキットを買うことが出来るし、自分でOlimexにEagleファイルを送って作ってもらうことも出来ます。
This board is available from ONP, please contact us support(at)onpllp.com.Otherwise, you can send Eagle files to Olimex and ask for the construction.
基板はArduinoのBootloaderを書き込むことによってArduinoクローンとしても機能します。Arduinoクローンとして使うときはAkiduinoと呼んでいます。シリアルモジュールや秋月電子で販売しているUSBシリアル変換ボードと組み合わせてPCと通信したり、Arduinoソフトウェアから書き込むことが出来ます。
This borad works as Arduino clone if you write in Bootloader. We refer the board as "Akiduino" when it is working as Arduino clone.You can combine the board and a Serial module or a USB serial module sold at Akiduki Denshi to communicate with PC. You can also write in with Arduino software.
Arduinoの基板と形が違うので各種シールドは残念だけど使えません。でもその代わりにブレッドボードでプロトタイピングするのがとても簡単です。(僕はこっちのほうがいいと思ってます。)
Unfortunately, shields cannot be used as the form of this board differs from that of Arduino board. However, it is very easy to make prototypes on the breadboard.(I believe that it is better this way.)
汎用のリセットボタンがありません。(ISP端子をショートしてリセットをかけてください)
There are no reset buttons. (Please reset by shorting out the ISP terminal.)
小ささや衝撃に強いことを優先したためにとても残念なことにCPUが交換できません。(こういったボールの中に基板を埋め込むプロダクトには向いてます)。初心者にはやさしくないのでこれは交換できるようなものも今後作りたいと思っています。(Boarduinoとかはcoolですね。)
As I had priority in its size and its strength, the CPU cannot be changed, which does not really suit for inexperienced users, and I would like to solve this point in the future.(Boarduino is a cool example which seems to have overcame this problem!)
[eagle files] [documents and pin assign]
パーツリスト/Parts List
Resources
Shop
この基板が使われている作品の紹介です。
It is an introduction of the works which a board is used for.